Welding wire reels

The welding wire coils are essential for the welder who needs to have the continuity of the filler material to weld.

The welding wire reels can be housed inside the welding machine and slide as it is used or two or more wire feed rollers push the filler material up to the wire guide torch.

The welding wire coils can be of different types: cored wire, steel wire, stainless steel wire, aluminum wire, brazing wire

Subcategories

Animated Welding Wire

The Cored Wire is a wire that brings Welding material composed of compacted powder or flux inside a tape or a tube.

The type of composition of the powder inside it indicates whether the cored wire is basic or rutile, the powder during the welding process generates slag on the surface of the joint which helps to protect it, but which must then be removed at the end of the welding. or to a subsequent pass.

The cored wire works with all the classic MIG / MAG generators however the best performances are obtained by associating these wires with pulsed synergic systems.

Welding Steel Wire

Steel wire coils are indispensable for the welder who needs to have the continuity of the filler material to weld with steel.

The steel wire coils can be housed inside the welding machine and slide as it is used or two or more wire feed rollers push the filler material up to the wire guide torch.

Stainless steel wire

Stainless steel wire coils are indispensable for the welder who needs to have the continuity of the filler material to weld with stainless steel.

The stainless steel wire coils can be housed inside the welding machine and slide as it is used or two or more wire feed rollers push the filler material up to the wire guide torch.

Aluminum Wire Welding

Aluminum wire coils are indispensable for the welder who needs to have the continuity of the filler material to weld with aluminum.

The Aluminum wire spools can be housed inside the welding machine and slide as it is used or two or more wire feed rollers push the filler material up to the wire guide torch.

Wire Brazing Welding

Brazing wire coils are indispensable for the welder who needs to have the continuity of the filler material to weld with brazing.

The Brazing wire reels can be housed inside the welding machine and slide as it is used or two or more wire feed rolls push the filler material up to the wire guide torch. The use of brazing allows to use a melting temperature that is much lower than steel and therefore the heating and deformation of the welded piece are very low.